Inground Pool Buyers Guide


POOL MATERIALS

Note: Our buyer's guide consists of approximately 4 printed pages of information, split into 3 web pages for ease of browsing. As you read it on-line, a link at the bottom of each page will load the next page of the Buyer's Guide. For your convenience, a plain text version (without graphics or colors) is also provided to simplify printing for off-line reference.

PRESSURE POOLS

Over 70 percent of in-ground pools sold today are built with galvanized steel, fiberglass, or plastic sides, a sand or optional concrete/vermiculite floor and a vinyl liner. These are known as "pressure pools" because the integrity of the walls are maintained by the force of water on the inside and dirt on the outside. We build these pool using either steel or polymer sides.  These types of pools are relatively inexpensive compared to concrete / gunite pools, or one piece fiberglass pools. Ordini's uses a larger concrete collar around the outside of the base to assure that the pool structure is stable, a vermiculite and cement base inside, along with our Master Pool Builders years of experience assures a trouble free pool for years to come.

FIBERGLASS

Another type of pool design is the fiberglass shell. In essence, this is a molded one piece tub that is installed in-ground. The benefit of a molded shell is the ease of installation, making it relatively economical. Fiberglass pools are very popular. Ordini's is the leading installer of these fine one piece pools. They give the homeowner instant satisfaction because we dig in the morning and you swim in your new backyard paradise that same evening. When we are finished the pool is full of water and the filtering system is fully functional. Everything in your yard is ready for landscaping and fencing. Why not invite Outer Banks and Ordini's into your backyard.

Read More About our Fiberglass Pools

OPINION: We highly recommend these pools for our area.

CONCRETE/GUNITE

The third type of in-ground pools available is concrete/gunite. These pools are made with poured concrete walls, and a floor that is poured or blown onto a wire grid. Generally the most expensive type of in-ground pool, concrete/gunite pools offer the buyer a wide range of styles, and can be plastered, trimmed with tile, or completely tiled. Stronger than fiberglass shell or vinyl liner pools, concrete/gunite will give years and years of service. The drawbacks include the need to acid wash the walls approximately every two years to remove algae and oils that have been absorbed by the porous walls. As concrete ages it continues to cure, and becomes prone to vertical cracking. Also, because concrete is somewhat porous, after a time tile may begin to loosen. All in all, concrete/gunite pools are higher maintenance than fiberglass or vinyl, but if price is not a concern, they offer many benefits not available in other types of pools.

Additional Pool Options:

STEPS

Basic pools usually include stainless steel ladders (one for the shallow end and one for the deep end). Step options include shallow end fiberglass recessed steps which extend beyond the perimeter of the pool, with the further option of installing Jacuzzi jets into the step walls. The other option is hand poured in-pool concrete steps.

LIGHTS

Lighting options include halogen, LED or Fiberoptic, that add ambance or elegance to any in-ground pool.

DIVING BOARDS / SLIDES

There are many different sizes and styles of diving boards and slides. Diving boards for residential pools are usually 6 or 8 feet long. Keep in mind that pools with diving boards require a deeper well, and the National Spa and Pool Institute suggests a minimum length of diving well (deep end) plus transition slope to measure approximately two-thirds of the total pool length. This can severely restrict the size of the shallow end in smaller pools.

HEATERS

Heaters are designed to extend a swimming season by approximately six to eight weeks, or to help maintain comfortable temperatures in pools that receive very little sunlight. Heaters are available in natural gas or propane (which will require a separate tank). An economical passive solar heater is available if your yard or roof can accommodate the solar panels. To estimate the size of the heater required, please read our heater page located in the Products section.

LINERS

Most vinyl liner pools offer a choice of several standard liner colors and patterns. Additionally, there is a wide selection of pattern and thickness upgrades available at a surcharge.

Getting Started

O.K. ... You've decided you want an in-ground pool. What's the first thing you need to do? Before you even consider meeting with a pool company, you need to find your townships’ “setback” requirements. This is the distances from your property lines and house that the pool must be to conform with zoning codes. Most townships have a brochure available which lists all requirements, including fencing specifications. Your next step is to decide the size and shape of the pool you want. Ordini’s suggests taking a length of rope and laying the outline out on your ground. Since the base price of any pool is usually determined by the length of the perimeter, measure and record the total length of the rope on the In-ground cost estimator. Finally, you need to obtain a copy of your plot plan, which is a drawing of your property showing all buildings, water lines, easements, etc.: You should have received a copy when you bought your house, but if you cannot find it, one should be on file with the township.

Now that you have all the required information, it's time to choose a pool company. If your schedule permits, we would suggest visiting the showrooms of all the builders you are considering. Do they have a pool on the premises to show you what the finished product will look like? Do they have samples and displays of the pools they install? Are they members of the National Spa and Pool Institute and/or the Better Business Bureau? How long have they been in business? Do their showrooms and representatives present a professional demeanor?

Once you've decided which pool and company is right for you, it's time to make an in-home appointment with a representative to examine the site. Please allow one or two hours to take measurements and work out the final details.

Remember, an in-ground pool represents not only a large investment, it is also the beginning of a long, hopefully satisfying relationship with the company that builds it. Price becomes a secondary factor if you're not comfortable with the people doing the job!

We hope this guide has be helpful in making your pool buying decision easier. We believe an informed client is a happy client. If you have any additional questions, please feel free to contact us at: 1-877-Swim1Day or joe@ordinis.com

 

Privacy Policy | Contact Us | Directions | Online Store | © 2006-07 Best Fiberglass Pools, Inc..
Web Design WebLink Studio, Inc.